RATCHET FASTENER ( Rivet )
|
|
Split Spacer
|
|
|
|
|
- Used on 1994-Current E-Z-GO Gas & Electric Vehicles during various parts & accessories installations
- Used primarily in front/rear vehicle body assemblies and accessory installations
- Size: .25x.887", Material: Plastic
|
Used on 1994-current E-Z-GO Gas & Electric TXT, Medalist, 4/6-Passenger Shuttle, ST 350, ST 400, ST 480, ST Sport, ST Sport II, ST Sport 2+2, Woods Boundary MAV 400, Woods Boundary MAV 480, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles Used in various vehicle installations, and is a predominant hardware item used in suspension work Open, tubular design; Made of steel
|
|
Bushing Leaf Spring EXGO
|
|
Bushing Leaf Spring EZGO
|
|
|
|
|
Used on 1994-current E-Z-GO Gas & Electric TXT, Medalist, Coastal Fleet cars, Clays Car, Workhorse 800 & 1000, MPT 800, 1000, & 1200 (Multi- Purpose Truck), Refresher 1200 & Oasis Beverage Cars, 1110 Jacobsen Haulers, ST Sport, ST Sport 2+2, ST 350, ST 480 & ST 4x4 Utility Vehicles, and Cushman 280, 2100, 2200 & 4800 Models; Will not fit RXV Models Component that fits in the eyelet of a leaf spring that helps limit vibrations from the axle and chassis Flanged, thermo-plastic polyurethane bushing which can be used on the front and rear leaf springs
|
Used on 1989-2007 E-Z-GO Gas & Electric Marathon & Industrial Models which include: 775, 804, 835, 875, 881, PC4, PC4X, PC4GX, PC4GXI, Shuttle 950, XI300 & XI500 Improves handling and ride quality Rubber compound that fits in the eyelet of the leaf spring
|
|
RXV CARBURETOR GASKET FOR KAWASAKI ENGINES
|
|
EXHAUST GASKET
|
|
|
|
|
- Used on 2008-current E-Z-GO Gas RXV Vehicles, and TXT, ST 400, Woods Boundary MAV 400, MPT 800/1200 (Multi-Purpose Truck), Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles with a Kawasaki Engine
- Measures: 2.5 x 1.5 x .1", Weight: 0.005 lbs
|
- Used on 2008-current E-Z-GO Gas TXT, RXV, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport II, ST Sport 2+2, Clays Car, MPT 800/1200 (Multi-Purpose Truck), Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles
- Provides a seal between the exhaust and engine head to prevent leaks that could create serious engine problems
- Measures: 2.5 x 2 x .1", Weight: 0.005 lbs
|
|
OIL SEAL
|
|
BAG STRAP CLIP EZGO
|
|
|
|
|
- Used on 1989-2004 E-Z-GO Gas & Electric Marathon (Gas-2/4 Cycle), 775, 804, 875, 881, Shuttle 950, PC4/PC4X/PC4GX/PC4GXI, and XI300/500/804 Vehicles
- Separates and retains lubricants while also keeping out dirt and contaminants
- Weight: .004 lb; Outer Diameter: 1.13", Bore Diameter: 1.13", Diameter: .875"; Case Material: Cold Rolled Steel
|
- Used on E-Z-GO 1996-current Gas & Electric TXT, Medalist and 2008-current RXV Vehicles equipped with a rear bag holder
- Secures the Bag Restrainer Strap (Part# 71853G01) to the bag holder bracket
- Color: Black
|
|
Thrust Washer
|
|
Fuel Filter EZGO-MG2/TXT/RXV
|
|
|
|
|
Thrust Washer RXV
|
•Used on 1994-current E-Z-GO 4-Cycle Golf Cars and Utility Vehicles with 295cc or 350cc Gas Engines and includes: RXV, Medalist, TXT, Carrier Series, Shuttle Series, 4-Caddy Series, ST Sport, ST 350, Tuff 1 Trucks, Workhorse 800 & 1200, MPT (Multi-Purpose Truck) 800 & 1200, Clays Cars, Industrial Cars 800, 875 & 1200, Oasis Cars, Refresher 1200, Hauler 1200, Jacobsen 1110 Haulers and Cushman Commanders 280 & 2200; in addition to 1992-current Club Car Gas DS Series & Precedent FE290 or FE350 4-Cycle Vehicles with the Overhead Valve Gas Engine (*two fuel filters are needed), and Yamaha Gas G14, G16, G20, G21 & G22 •This fuel filter is NOT to be used on E-Z-GO ST 480 and ST 4x4 Vehicles or 2-Cycle Vehicles •Recommendation: Change spark plugs and air filter when changing fuel filter
|
|
14MM GASKET DIFFERENTIAL FOR 4 CYCLE ENGINE
|
|
COMPRESSION SPRING
|
|
|
|
|
14MM GASKET DIFFERENTIAL FOR 4 CYCLE ENGINE
|
Compression Spring
|
|
Handle F&R EZGO
|
|
O-RING FOR 4 CYCLE OIL FILTER
|
|
|
|
|
Used on 1996-current E-Z-GO Gas & Electric Vehicles with a mechanical direction selector
|
- Used on 1991-2008 E-Z-GO Gas TXT, Medalist, Marathon (4-cycle), PC4X/PC4GX/PC4GXI, XI300/XI500/XI804, ST 350, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, 4/6-Passenger Shuttle, Shuttle 950, 804, 875, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, and Vehicles with a 9 or 11 HP Engine or 1992-current 295cc or 350cc Fuji-Robin Engine
- Creates a tight seal between the oil filter and engine
- This item is not to be used on RXV Vehicles
|
|
RXV ACCELERATOR PEDAL COVER
|
|
Spark Plug BPR4ES EZGO
|
|
|
|
|
- Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles
- Skid-resistant cover that fits over accelerator pedal
- Material: Rubber; Dimensions: 5 x 2.6 x 3.19"
|
•Used on 1992-2005 E-Z-GO Gas 875, 4/6-Passenger Shuttle, ST Express, 1992-current Vehicles with 295cc and 350cc Fuji-Robin Engines, Refresher, Workhorse 1200, ST 350, ST Sport, ST Sport 2+2, and Clays Car Models
•Serves as a pathway for electrical energy from the ignition coil, and creates a spark that is used to ignite the air and fuel mixture within the combustion chamber to keep your vehicle running smoothly
•NGK Spark Plug for 11HP Pre-MCI & MCI Engines; Worn spark plugs can result in poor start-ups and take-offs
|
|
FLANGED URETHANE BUSHING
|
|
Spark Plug, EZGO 9HP, Pre-MCI Engine
|
|
|
|
|
- Used on 2008-current E-Z-GO Electric RXV and 2010-current 2Five Vehicles
- Replacement bushing required in leaf spring installations
- Measures: 1.65" x 1.42" x 1.08"; Material: Internally lubricated Thermoplastic polyurethane, Color: Black
|
•Used on 1992-2003 E-Z-GO 4-Cycle, 295cc Pre-MCI Engines and Yamaha Gas G16, G20, G21 & G22 Models
•Serves as a pathway for electrical energy from the ignition coil, and creates a spark that is used to ignite the air and fuel mixture within the combustion chamber to keep your vehicle running smoothly
•14mm Thread, 19mm (3/4") Reach, 13/16" (20.6mm) Hex Size
|
|
COMPRESSION SPRING
|
|
4-CYCLE INPUT SHAFT/DIFFERENTIAL OIL SEAL
|
|
|
|
|
- Used on 1994-current E-Z-GO Gas & Electric TXT, 4/6-Passenger Shuttle, Medalist, ST 350, ST 400, Woods Boundary MAV 400, ST 480, Woods Boundary MAV 480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher, Refresher 1200, 875, 881, Shuttle 950, Cushman 2/4/6-Passenger Bellhop, Cushman 280, Cushman Titan (Electric), Cushman Commander 2200 and 2Five Electric Vehicles
- Controls pedal rebound to enable the operation of the accelerator pedal
- Measures: 4.25 x 1 x 1", Weight: .11 lb
|
- Used on 1992-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle, Medalist, ST 350, ST 480, Woods Boundary MAV 480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, 875 Vehicles, and 1992-current Transaxles
- Separates and retains lubricants while also keeping out dirt and contaminants
- Size: 25 x 45 x 7"
|
|
U-BOLT
|
|
PINION SEAL
|
|
|
|
|
U-Bolt for RXV Rearend
|
- Used on 2001-current E-Z-GO Gas & Electric TXT, 4/6-Passenger Shuttle, Gas: ST 400, Woods Boundary MAV 400, ST 480, Woods Boundary MAV 480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher, Refresher 1200, Cushman 2/4/6-Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles
- Keeps debris from the pinion and from entering the steering box
- Approximate weight: .05 lbs
|
|
GREASE SEAL
|
|
4-CYCLE OIL PUMP O-RING
|
|
|
|
|
- Used on 1991-current Gas & Electric TXT, 4/6-Passenger Shuttle, 640, 775, 875, 881, Shuttle 950, ST Express, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher, Refresher 1200, Cushman 2/4/6 Passenger Bellhop, Cushman 280, Cushman Commander 2200, and Cushman Stock Chaser Vehicles
- Prevents leakage and the access of fluids and dirt to minimize damage and failure of the bearing and related components
- Weight: .04 lb
|
- Used on 1992 thru mid-year 2008 E-Z-GO Gas Vehicles with a 4-Cycle, 295cc or 350cc Fuji-Robin Engine
- Located where the oil filter and oil pump connect, this ring prevents the leakage of oil
- Prior to replacement, please make sure to order the correct O-Ring for your vehicle
|
|
Exhaust gasket for muffler. For E-Z-GO gas (4 cycle) 1991-up.
|
|
SPARK PLUG FOR RXV & ST 4X4
|
|
|
|
|
Exhaust gasket for muffler. For E-Z-GO gas (4 cycle) 1991-up.
|
- Used on 2008-current E-Z-GO Gas RXV & 2004-2007 ST 4x4 Models
- Serves as a pathway for electrical energy from the ignition coil, and creates a spark that is used to ignite the air and fuel mixture within the combustion chamber to keep your vehicle running smoothly
- Also used on Kawasaki applications
|
|
Keys RXV (set of 2) EZGO
|
|
Spark Plug for ST 480
|
|
|
|
|
Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles Made to use on RXV Vehicles for vehicle start-up This item replaces Part# 606993
|
•Used on St 480 Vehicles with Briggs-Stratton Engine
|
|
ACCELERATOR PAD KIT
|
|
Air Filter Pre Clean EZGO
|
|
|
|
|
- Used on 1992-mid year 2008 E-Z-GO Gas & Electric Marathon, TXT, Medalist, 4/6-Passenger Shuttle, ST 350, ST 480, Woods Boundary MAV 480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, 804, 875, Shuttle 950, PC4/PC4X/PC4GX/PC4GXI, XI300/500/804, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles
- Kit allows for the installation of a new or replacement accelerator pedal
- Measures: 8.9 x 3.5 x .75", Weight: .41 lb
|
•Used on E-Z-GO Gas ST 480 and Woods Boundary MAV 480 Vehicles
•Enhances the functionality and extends the life of the air filter
•Measures: 4 x 3.5 x 2.75", Weight: .07 lb
|
|
OIL SEAL, 28 X 47 X 8"
|
|
BREATHER TUBE
|
|
|
|
|
- Used on 1992-current E-Z-GO Gas TXT, RXV, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport II, ST Sport 2+2, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles, and 1992-current 4-Cycle Transaxles
- Separates and retains lubricants while also keeping out dirt and contaminants
- Dimensions: 28 x 47 x 8"
|
- Used on 2008-current Gas Vehicles with a Kawasaki Engine, including RXV Models
- Provides ventilation for the engine in allowing the passage of air pressure and fumes from the crankcase
- Weight: .045 lb, Measures: 5.63" x .5" x 5.63"
|
|
SEAL SET
|
|
ROLLOVER VALVE
|
|
|
|
|
- Fits Electric E-Z-GO Golf Cars 1988-Current
|
- Used on 2008-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle, RXV, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport 2+2, Clays Car, MPT 800/1200 (Multi-Purpose Truck), Refresher, Refresher 1200, 2/4/6-Passenger Cushman Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles
- Shuts down the fuel system should the vehicle roll-over or become upside down
- Measures: 1.5 x 1.5 x .75", Weight: .04 lb
|
|
Rocker cover gasket. For E-Z-GO gas (4 cycle) 1991-up.
|
|
ACCESS COVER
|
|
|
|
|
Rocker cover gasket. For E-Z-GO gas (4 cycle) 1991-up.
|
- Used on 1994-current E-Z-GO Gas 4/6-Passenger Shuttle, ST Express, MPT 800 (Multi-Purpose Truck), and Workhorse 1200 Models
- Serves as a cover for the microswitch area of the vehicle's floorboard
- Material compostion: Sheet metal
|
|
Fuel Filter EZGO ST480 Briggs engine
|
|
SIPHON TUBE
|
|
|
|
|
•For use of ST 480 California Air Resource Board 2006-2008 Briggs Engine
|
- Used on 2004-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle, RXV, MPT 800 (Multi-Purpose Truck), Refresher, Refresher 1200, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles
- Allows the flow of fuel through vehicle's fuel system
- Measures approximately: 10"; Weight: .02 lbs
|
|
PVC AIR INTAKE HOSE-GAS
|
|
Oil Fliter EZGO RXV
|
|
|
|
|
- Used on 1994-2008 E-Z-GO TXT, Medalist, 875, 4/6-Passenger ST Express, Shuttle 950, ST 350, Workhorse 800/1200 and Refresher Models
- Responsible for recycling gas and exhaust fumes from the engine back to the air filter
- Positive Crank Ventilation Intake Hose
|
EZGO RXV Oil Filter Kawasaki
|
|
Air Filter Element EZGO
|
|
ENGINE MOUNT COMPRESSION SPRING
|
|
|
|
|
•Used on 1996-2006 E-Z-GO 4-cycle Gas Vehicles, including TXT, Medalist, Workhorse-MPT (Multi-Purpose Truck), and ST Vehicles •Vehicle maintenance is essential for the long-term operation of your vehicle. To ensure optimum performance and maintenance of your E-Z-GO 4-Cycle Gas Vehicle, a high quality air filter should be used to help keep the engine running smoothly •Rectangular air box measures: 11-3/4"x5-1/4"x2", Filter includes screen to cover carburetor intake; It is best to change the Air Filter Element, Fuel Filter, Oil Filter and Spark Plugs (2) at the same time **NOTE: If your E-Z-GO golf car has a canister style air filter instead of the flat, rectangular air filter, please reference the E-Z-GO Utility Vehicle Air Filter (Part #28463G01) for 4-Cycle vehicles 1996-current
|
- Used on 2008-current E-Z-GO RXV, ST Sport 2+2, 4/6-Passenger ST Shuttle, Clays Car and MPT 800 (Multi-Purpose Truck) Vehicles, and other manufacturer's vehicles with a 13HP Kawasaki Engine
- Returns the engine valves to their original positions
- Measures: 2.4 x 2 x 2", Weight: .21 lb
|
|
OIL DRAIN PLUG
|
|
HONDA OIL FILTER (ST 4X4)
|
|
|
|
|
- Used on all Fuji 4-cycle engines from 1991-current
- Not for use in Kawasaki applications
|
- Used on E-Z-GO Gas ST 4X4 Models
- Removes contaminants and impurities from engine oil to keep your vehicle in excellent condition and prolong engine life
- For E-Z-GO ST 4x4 vehicles, it is recommended that oil changes are done twice a year or every 125 hours of vehicle operation, and at the beginning of Spring to remove moisture accumulated from the Winter months
|
|
Starter Generator Belt EZGO
|
|
ACCELERATOR CABLE (4-CYCLE) 33-11/16"
|
|
|
|
|
Used on E-Z-GO Gas TXT, Medalist, Marathon, 875, 4/6-Passenger Shuttle, ST Express, Shuttle 950, 1992-current Vehicles with the 295cc & 350cc Fuji-Robin Engine, and ST Sport Models Not for use on E-Z-GO RXV, ST480, ST4x4, and 4800 Cushman Commander Models Belt measures 1/2" wide x 34-7/8" outside diameter; When this part is worn it can lead to rough or jerky start-ups, timely replacement is needed
|
- Used on 1991-1996 E-Z-GO Gas Marathon, PC4X/PC4GX/PC4GXI, XI300/XI500/XI804, and 804 Vehicles
- Responsible for aiding the engine in vehicle acceleration
- Measures approximately: 33-11/16"; Material: Polyethylene covered cable with polyethylene lined conduit
|
|
ACCELERATOR CABLE-WORKHORSE - 40.25"
|
|
ACCELERATOR ROD (GAS)
|
|
|
|
|
- Used on 1996-2005 E-Z-GO Gas Workhorse 1200, Refresher 1200, ST 350 and ST Sport Vehicles
- Responsible for aiding the engine in vehicle acceleration
- Material: Polyethylene covered cable with polyethylene lined conduit; Measures: 40.25"
|
- Used on 1994-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle, Medalist, ST 350, ST 400, Woods Boundary MAV 400, ST 480, Woods Boundary MAV 480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, 875, Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles
- Enables the safe, effective operation of the vehicle's ability to accelerate
- Measures: 7.25 x .25 x .25", Weight: .145 lb, Material: 304 Stainless Steel
|
|
FUEL TANK RATCHET CAP
|
|
Choke Cable
|
|
|
|
|
EZGO Fuel Tank Cap
|
Choke Cable RXV
|
|
4-CYCLE CARBURETOR LINK ROD ASSEMBLY
|
|
Belt Starter Generator
|
|
|
|
|
- Used on 1991-2008 E-Z-GO Gas Marathon (4-Cycle), TXT, Medalist, 4/6-Passenger Shuttle, ST 350, ST Sport, ST Express, Workhorse 800/1200, Refresher, 804, 875, PC4/PC4X/PC4GX/PC4GXI, and XI300/XI500/XI804 Vehicles
- This link rod should only be used on E-Z-GO Vehicles with a 4-Cycle Gas Engine
- Approximate weight: .32 oz
|
Used on 1980-1994 2-Cycle Gas Marathon and PC4 Models and 2008-Current E-Z-GO Gas Vehicles with the Kawaski Engine Enables the engine to stop briefly when vehicle is stationary while operating, and then allows engine to resume operation Measures approximately: 1/2" wide x 35-3/4" Outside Diameter; When this part is worn it can lead to rough or jerky start-ups, timely replacement is needed
|
|
Choke Cable
|
|
Body Rivet Kit
|
|
|
|
|
This factory replacement choke control assembly is manufactured for use on February 1995-current E-Z-GO Gas TXT, Medalist, ST 350, ST Sport, ST Sport II, ST Sport 2+2, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200 Vehicles Assists in cranking vehicle engine especially during cold or difficult start-ups Approximate weight: .20 lbs
|
Used on 1996-current E-Z-GO Gas & Electric TXT Models with the plastic body Contains the necessary items and hardware required for assembling the front cowl and rear body only of the TXT; Does not include the trim or rocker panel Only for use on 1996-current TXT Models
|
|
Choke Cable
|
|
Rod End Assembly for RXV EZGO
|
|
|
|
|
Used on 2008-current E-Z-GO Gas ST Sport, ST Sport 2+2, and Clays Car Vehicles with a Kawasaki Engine Essential cable in the vehicle's carburetor that is responsible for throttle control Measures: 25.5 x 1.25 x 1.25", Weight: .21 lb
|
Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles
|
|
Spark plug wire kit. For E-Z-GO gas 1991-up (all 4-cycle)
|
|
INTAKE VALVE FOR 295 & 350 MCI ENGINES
|
|
|
|
|
Spark plug wire kit. For E-Z-GO gas 1991-up (all 4-cycle). 2/pkg
|
- Used on 1992-current E-Z-GO 4-Cycle Gas Vehicles with the 295cc and 350cc Fuji-Robin Engine
- Allows the flow of air and fuel into the engine's cylinders
- Replacement valve for vehicle
|
|
Brake Shoe EZGO
|
|
Accelerator Cable EZGO
|
|
|
|
|
•Used on E-Z-GO 1997-current Gas & 1996-current Electric 2 and 4-Passenger Medalist, TXT and RXV (Gas only) Golf Cars, the 4 and 6 seater Shuttle Series Personnel Carriers, the Refresher 1200 Beverage Cars, the 800 and 1000 Industrial Cars, the 800 and 1200 Hauler Cars, the Clays Car, the 800, 1000, & 1200 Workhorse Trucks, the ST 350 (1996-current Gas & Electric), ST Sport, and ST Sport 2+2 Utility Vehicles, and the 800, 1000 & 1200 MPT (Multi-Purpose Truck); Also compatible with Yamaha 1994-current Models
•This brake shoe is used to replace any existing brake shoe for safety and maintenance purposes while contributing to the optimum performance of your vehicle's braking system
•One SET (2 brake shoes) of brake shoes is needed per wheel; This is a Non-asbestos brake shoe with measurements of: approximately 5-5/16"L x 1-3/16"W
|
Accelerator Cable RXV
|
|
Shock Bushing Kit
|
|
INTAKE VALVE FOR 4-CYCLE ENGINE
|
|
|
|
|
- Used on 1984-current E-Z-GO Gas & Electric Vehicles
- Enhances suspension performance to provide a more stable, comfortable ride and handling
- Kit includes: 16 Shock Bushings, 16 Shock Washers, 8 3/8" Hex nuts
|
- Used on 1992-1994 E-Z-GO Gas Marathon (4-Cycle), XI300/XI500/XI804, PC4/PC4X/PC4GXI, and 804 Vehicles
- Allows the flow of air and fuel into the engine's cylinders
- Should your vehicle have a Pre-MCI engine and requires a replacement for Part# 26619G01, Valve Retainer, you should replace all of the following valves and related components with: Valve Spring Retainer, Part# 72509G01 (4 each); Collet, Part# 72510G01 (8 each); Valve Spring, Part# 472511G01 (4 each); Intake Valve, Part# 72507G01 (2 each), Exhaust Valve, Part# 72508G01 (2 each)
|
|
OIL FILLER CAP, 4 CYCLE
|
|
RXV STEERING ROD
|
|
|
|
|
- Used on 1992-2008 E-Z-GO Gas Vehicles, including: Marathon, TXT, Medalist, 804, 875, PC4GX/PC4GXI, GXI804, 4/6-Passenger Shuttle, Refresher, ST 350, ST Sport, ST Sport II, ST Sport 2+2, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, and 1992-current 4-Cycle Vehicles with the Pre-MCI/MCI Fuji-Robin Engine
- Seals oil valve cover
- Cannot be used on vehicles with a Kawasaki Engine
|
- Used on 2008-current E-Z-GO Gas & Electric RXV and 2010-current Electric 2Five Vehicles
- Connects the front wheels in the vehicle's front suspension to direct the wheels via the steering system
- Measures: 4" x 4" x 2"
|
|
Air Filter Element EZGO
|
|
Oil Filter 9 & 11HP Engines
|
|
|
|
|
•Used on 1996-current E-Z-GO 4-Cycle Gas Turf and Industrial Vehicles with the canister-style air filter system, including TXT (2007-current), RXV, Workhorse, MPT (Multi-Purpose Truck) 1200, ST Vehicles (except ST 4x4) and Club Car's Precedent
•Works also for vehicles equipped with the Kawasaki or 35cc Fuji engines
•Paper element enclosed in cylindrical shaped canister, with blue casing
|
• Used on any E-Z-GO Vehicle with a 9 or 11 Horsepower Engine
•Removes contaminants and impurities from engine oil to keep your vehicle in excellent condition and prolong engine life
•For E-Z-GO Vehicles it is recommended that oil changes are done twice a year or every 125 hours of vehicle operation, and at the beginning of Spring to remove moisture accumulated from the Winter months
|
|
Choke Cable
|
|
Shock Front EZGO
|
|
|
|
|
This factory replacement choke control assembly is manufactured for use on 1996-2008 E-Z-GO Gas Vehicles, including Clays Car, Workhorse- MPT 800/1200 (Multi-Purpose Truck), ST 350, and ST Sport Models Assists in cranking vehicle engine especially during cold start-ups Weighs approximately: .20 lbs
|
• Used on 2001-current E-Z-GO Gas & Electric TXT, Medalist, MPT (Multi-Purpose Truck) & Workhorse 800/1000/1200, Clays Car, Refresher 1200, ST Sport, ST Sport II & 4-6 Passenger ST Express, ST Sport 2+2, Shuttle Series, 2/4/6 Passenger Bellhop, and Cushman 280; Also fits 1989-1994 Gas & Electric Marathon
•Part of your vehicle's front suspension that, along with the spring, controls the up-and-down motion of your wheels; Shocks should be replaced if your vehicle experiences prolonged bouncing
•Bushings are not included with shock, please reference Part# 10194G1 for ordering shock bushings; This shock replaces Part# 70928G01
|
|
KINGPIN BOLT
|
|
EXHAUST VALVE FOR 295/350CC
|
|
|
|
|
- Used on E-Z-GO 2Five and RXV Vehicles
- Bolt: M12-1.25 X 150
- Hardware fits with Kingpin Tube (Item# 614034)
|
EXHAUST VALVE FOR 295/350CC ENGINES WITH COLLET STYLE KEEPERS
- Used on Gas & Electric E-Z-GO Vehicles with a 1992-current 295cc or 350cc Engine
|
|
ACCELERATOR CABLE (4-CYCLE 800)
|
|
Forward & Reverse Cable EZGO
|
|
|
|
|
- Used on GXT/GXI-300/500/804 1991-1992
|
- Used on 1991-1996 E-Z-GO Gas 804 and Marathon 4-Cycle Engine Models
- Control cable that operates within vehicle's forward and reverse direction selector
- Approximate weight: .44 lbs
|
|
Kingpin Tube
|
|
RXV STEERING YOKE
|
|
|
|
|
- Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles, and 2Five Electric Vehicles
|
- Used on 2008-current E-Z-GO Gas & Electric RXV, and Electric 2Five Vehicles
- Links the steering wheel to the steering unit
- This yoke should only be used on RXV and 2Five Vehicles
|
|
STANDARD AIR FILTER HOUSING (BLACK)
|
|
Forward & Reverse Cable EZGO
|
|
|
|
|
- Used on 1998-2004 E-Z-GO Gas TXT, Medalist, 4/6-Passenger Shuttle Models
- Encloses and protects air filter box
- Material composition: Plastic
|
- Used on 1991-1996 E-Z-GO Gas 804 and Marathon 4-Cycle Engine Models
- Control cable that operates within vehicle's forward and reverse direction selector
- Approximate weight: .44 lbs
|
|
Choke Cable
|
|
Belt Drive CVT EZGO
|
|
|
|
|
Choke cable. For E-Z-GO gas 2004-up ST4x4
|
Used on all 1994-current E-Z-GO 4-Cycle Vehicles, and is ideal for 4-Cycle vehicles with continuously variable transmissions This belt will not fit RXV Models Measures: 1-1/8" X 42" OD
|
|
Belt Drive
|
|
Tie Rod End LH EZGO
|
|
|
|
|
Used on 1991-1996 E-Z-GO Gas Vehicles with a 3PG Engine, 2 & 4-Cycle Marathon, PC4X/PC4GX/PC4GXI, XI300/XI500/XI804 and 804 Industrial Vehicles Enables the operation of many vehicle accessories, including the alternator Measures approximately: 1-3/16" X 40-3/4" O.D.
|
Used on 1998-current E-Z-GO Gas & Electric TXT, Medalist, 640, 804, 835, 875, 881, ST 350, ST 480 (Gas), ST Sport, ST Sport 2+2, ST Express, Clays Car, 4/6-Passenger Shuttle, Shuttle 950, Stock Chaser and Workhorse 800/1000/1200 Vehicles
Connects inner and outer tie rods to the steering knuckle
Used with Part#'s 70904G02 (Tie rod assembly) and 70904G04 (Tie Rod Assembly for ST Vehicles)
|
|
Shock Rear EZGO
|
|
Tie Rod End LH
|
|
|
|
|
Used on E-Z-GO Gas & Electric 1994-current TXT & Medalist, 2005-current 2/4/6-Passenger Shuttle Express, 2001- current Gas Woods Boundary MAV 480, 2001-2008 Clays Car, 1996-2008 Workhorse-MPT (Multi-Purpose Truck) 800/1000, Gas ST 350, ST 480, ST Sport & ST Sport II, and 2008 Cushman 280 Part of your vehicle's rear suspension that, along with the spring, controls the up-and-down motion of your wheels; Shocks should be replaced if you experience leakage or “bottoming-out” Bushings are not included with this shock, please reference Part# 10194G1 to order shock bushings
|
Used on 1998-current E-Z-GO Gas & Electric TXT, Medalist, 640, 804, 835, 875, 881, ST 350, ST 480 (Gas), ST Sport, ST Sport 2+2, ST Express, Clays Car, 4/6-Passenger Shuttle, Shuttle 950, Stock Chaser and Workhorse 800/1000/1200 Vehicles
Connects inner and outer tie rods to the steering knuckle
Used with Part#'s 70904G01 (Tie rod assembly) and 70904G04 (Tie Rod Assembly for ST Vehicles)
|
|
ACCELERATOR CABLE
|
|
Accelerator Cable
|
|
|
|
|
- Used on 1998-2004 E-Z-GO Gas 875 & Shuttle 950 Vehicles
- Enables the vehicle to accelerate when the gas pedal is pressed
- Measures: 66"; Polyethylene covered, lined cable
|
Used on 2008-current E-Z-GO Gas ST 400, Woods Boundary MAV 400, MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, and Cushman Commander 2200 Vehicles OEM replacement cable required in the accelerator for its effective operation Measures: 75.75"
|
|
Forward and Reverse Cable EZGO
|
|
GAS ACCELERATOR CABLE FOR MG5/SHUTTLE 63"
|
|
|
|
|
Used on 1996-2001 E-Z-GO Gas Workhorse 1200, Refresher, ST 350 and ST Sport Models Controls forward and reverse directions Weighs approximately: .20 lbs
|
Fits Shuttle 2/4/6 1995-current
|
|
FAN, EZ RXV 2008+ W/ KAWASAKI ENGINE
|
|
PISTON FOR 295CC ENGINE
|
|
|
|
|
FAN, EZ RXV 2008+ W/ KAWASAKI ENGINE
|
PISTON FOR 295CC ENGINE
|
|
AIR FILTER HOUSING (GRAY)
|
|
PISTON RING SET (OVER SIZE, 0.500MM)
|
|
|
|
|
Used on all rectangular air boxes since 1995, except RXV Vehicles
|
PISTON RING SET (OVER SIZE, 0.500MM)
|
|
INTAKE VALVE
|
|
SEALED FUEL CAP
|
|
|
|
|
|
- Used on 2008-current E-Z-GO Gas RXV, Refresher and Refresher 1200 Vehicles
- Prevents leakage of fuel and the entry of contaminants that would otherwise prove harmful to the fuel system
- This fuel cap should only be used on RXV and Refresher Vehicles to ensure a secure fit
|
|
Steering Wheel
|
|
Tune Up Kit
|
|
|
|
|
Used on E-Z-GO Golf Cars & Turf Vehicles including: 2008-current 4/6-Passenger Shuttle Series, Clays Car, TXT Golf Cars, 800/1000/1200 Workhorse & MPT (Multi-Purpose Truck) Models, and ST 2+2 Utility Vehicles made until 1996; Also compatible with Columbia- Harley Davidson Golf Cars made until 1982, 1976-1984 Club Car Golf Cars, all Chrysler GEM Cars, Bombardier Cars and the later model Cushman Golf Cars and Utility Vehicles This 4-spoked steering wheel gives your golf car or utility vehicle a sleek, sporty appearance and will fit a 40-spline steering shaft Steering Wheel is sold individually; For complete installation please order the score card (Part# 607925), cover (Part# 71147G01), and hub (Part# 71949G01
|
- Used on 2008-current E-Z-GO Gas Vehicles with a Kawasaki 13HP Engine
- Aids in maintaining optimum vehicle performance
- Included in the kit are: Air Filter, Oil Filter, Fuel Filter, and spark plug for a Kawasaki Engine
|
|
TAPERED LEAF SPRING
|
|
ACCELERATOR PEDAL BRACKET
|
|
|
|
|
- Used on 2010-current E-Z-GO Electric 2Five Vehicles
- Mounts between the vehicle's frame and the axle housing to carry and balance the load of the vehicle
- Measures: 32" x 2" x 4", Weight: 6 lbs
|
- Fits E-Z-GO Electric Workhorse 800 1999 - 2000, Electric Shuttle 4/6/ST Express 2005-2009, Electric MPT 800 & 1000 2004 - 2007 and Gas MPT 1200 2006-2008
|
|
PISTON RING SET (OVERSIZE, 0.25MM)
|
|
4-CYCLE RING SET
|
|
|
|
|
- Used on 1992-current E-Z-GO Gas Vehicles with a 295cc (Pre-MCI/MCI) Fuji-Robin Engine
- Prevents combustion pressure from leaking into the crankcase, and prevents the leakage of oil into the engine chamber
- Measures: 3.45" x 3.45" x 0.5", Weight: .005 lb
|
- Used on all 1992-current 4-Cycle 295cc Fuji-Robin engines, including MCI and Pre-MCI
- Regulates engine oil consumption, seals the combustion chamber, and supports the transfer of heat from the piston to the cylinder wall
- Set includes three rings, two compression and one wiper ring; Two sets are needed per Engine, these are the standard size piston rings
|
|
Accelerator Cable
|
|
Accelerator Cable
|
|
|
|
|
Used on 2008-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle and Cushman 2/4/6-Passenger Bellhop Vehicles OEM replacement cable required in the accelerator for its effective operation Measures: 180" x .3", Weight: .615 lb
|
Fits Gas EzGo TXT Models, 2010+
|
|
PISTON RING SET (OVER SIZE 0.500MM)
|
|
Oil Filter EZGO ST480
|
|
|
|
|
PISTON RING SET (OVER SIZE 0.500MM)
|
•Used on E-Z-GO ST 480 Vehicles with a Briggs & Stratton Engine
•Removes contaminants and impurities from engine oil to keep your vehicle in excellent condition and prolong engine life
•For E-Z-GO Vehicles it is recommended that oil changes are done twice a year or every 125 hours of vehicle operation, and at the beginning of Spring to remove moisture accumulated from the Winter months
|
|
PISTON (OVERSIZE .50MM)EH35C
|
|
PISTON -STD-.67MM-EH35C
|
|
|
|
|
- Fits 350cc engines, 1994 - current
|
- Fits 350cc engines, 1994 - current
|
|
PISTON RING SET(OVER SIZE, 0.25MM)
|
|
PISTON RING SET EH35C
|
|
|
|
|
- Used on 1994-current E-Z-GO Gas Vehicles with a 350cc (Pre-MCI/MCI) Fuji-Robin Engine
- Prevents combustion pressure from leaking into the crankcase, and prevents the leakage of oil into the engine chamber
- Measures: 3.45" x 3.45" x 0.5", Weight: .005 lb
|
PISTON RING SET EH35C
|
|
Fuel Pump
|
|
DRIVE BELT
|
|
|
|
|
EZGO Fuel Pump 1982-1988 2 Cycle
|
- Used on 2008-current E-Z-GO Gas RXV, TXT, ST 400, ST Sport, ST Sport 2+2, Woods Boundary MAV 400, ST Express, Clays Car, 4/6- Passenger Shuttle, MPT 800/1200 (Multi-Purpose Truck), Refresher, Refresher 1200, Cushman 280, Cushman 2200, and Cushman 2/4/6- Passenger Bellhop
- Responsible for powering many of the vehicle's accessories during the operation of the engine's crankshaft
- Outer circumference: Approximately 36"
|
|
Accelerator Cable
|
|
ACCELERATOR CABLE FOR ST480
|
|
|
|
|
Used on 2002-2009 E-Z-GO Gas Workhorse-MPT (Multi-Purpose Truck) 1200, ST 350 and ST Sport Vehicles Responsible for aiding engine in vehicle acceleration Measures: 55 1/2" L
|
- Used on E-Z-GO ST 480 Models Only
- Connects the throttle body of the carburetor to the accelerator pedal
- Replacement of the vehicle's accelerator cable may be needed if you experience slow engine response when pressing the gas pedal
|
|
Belt Drive Team EZGO
|
|
EXHAUST VALVE 4 CYCLE
|
|
|
|
|
Used on 2011-Current E-Z-GO Gas RVX, Terrain, and Cushman Vehicles Part assembled on Kawasaki engines with Team Clutches Approximate Width: 1.25"
|
- Fits all 4-cycle engines for 295cc and 350cc
|
|
THROTTLE CABLE - 52.06"
|
|
STARTER BRUSH, 4 CYCLE (SET OF 4)
|
|
|
|
|
- Used on 2002-2009 E-Z-GO Gas TXT, Workhorse-MPT (Multi-Purpose Truck) 800/1200, ST 350 and ST Sport, ST Sport II, ST Sport 2+2, and Clays Car Vehicles
- Aids engine in vehicle acceleration
- Measures: 52.06" L
|
- Used on all 1991-current E-Z-GO 4-Cycle golf cars and utility vehicles, and is compatible with 1984-1996 Club Car vehicles and 2004-current DS Series, Precedent Gas Models, 1972-1995 Columbia 2-Cycle Gas Vehicles, and Yamaha G1/G2/G8/G9/G11/G14/G16/G22 Gas Models
- This is a replacement brush for all vehicles with the Hitachi starter/generator
- 4 starter brushes are included
|
|
ACCELERATOR CABLE
|
|
Air Filter Cartridge EZGO ST480
|
|
|
|
|
- Used on 2001-current E-Z-GO Gas TXT, Medalist, Clays Car, Workhorse-MPT 800 (Multi-Purpose Truck), ST Sport 2+2, ST Sport, ST Sport II & Cushman 280
- Connects from the accelerator pedal to the governor
- Measures approximately: 42.22” (Before bend)
|
•Used on 2001-current E-Z-GO Gas ST 480 Models
•Filters out dirt, dust and debris from the air to prevent entry into vehicle's intake system and possible damage to the engine
•Air filter should be changed at least twice a year to keep vehicle in good performance and to extend the life of your ST 480
|
|
4-Cycle Engine Tune-Up Kit With Rectangular Air Filter
|
|
BRAKE DRUM/HUB-4LUG (GAS)
|
|
|
|
|
- Used on E-Z-GO 1994-current E-Z-GO Vehicles with 295cc or 350cc 4-Cycle Engine that require the rectangular shaped air filter, including: 2, 4, & 5-Passenger TXT, Medalist, Tuff 1 or 804 Turf Trucks, Personnel Carriers, Oasis, Shuttle Series, Grand Oasis, Refresher 1200 Beverage Cars, 800 & 1200 Industrial Cars, the Clays Cars, the 800 and 1200 Workhorse Vehicles, 800 & 1200 Haulers, ST 350, ST Sport & ST Sport 2+2 Utility Vehicles, Jacobsen 1110 Haulers, and the 280 & 2200 Cushman Commanders with the newer style MCI 295cc Engine
- This tune-up kit is an excellent maintenance tool for keeping your vehicle in optimum condition
- Kit includes: 1 rectangular-shaped air filter, 1 oil filter (Fuji Engine), 1 fuel filter, 2 spark plugs, 2 spark plug wires, and 1 O-ring
|
- Used on 1992-current E-Z-GO 4-Cycle Gas Vehicles, including 4 Caddy, TXT 2+2 & Clays Car, 804, Tuff 1, the WorkHorse & MPT (Multi-Purpose Truck) Models 800 (4-Cycle Gas only) & the 1200, can also be used on 48V Electric MPT 1000 and 4/6-Passenger Shuttle Vehicles; Also used on Cushman Commander Gas 280 & 2200 Model trucks, the Jacobson 1110 Gas truck and the Brouwer LX1200 truck; This item replaces part number 21807G1P
- This part is NOT suitable for the E-Z-GO 800 and 900 Series heavy-duty, gas powered carriers or 1992-current ST 350, ST 480 and ST 4x4 trucks with hydraulic brakes
- Has a 1 5/16" center hole with an internal 30-tooth "star" spline to interface with the axle. It is held in place by a castellated nut (3/4" x 16tpi) and a thick (.118") flat washer. All Electric models and the earlier 2-cycle gas hub/drums have a smaller hole and are not interchangeable with this hub/drum
|
|
PISTON RING SET FOR KAWASAKI ENGINES
|
|
CABLE - PUSH/PULL - FORWARD & REVERSE - 66"
|
|
|
|
|
- Used on 2008-current Vehicles with a Kawasaki Engine
- Prevents combustion pressure from leaking into the crankcase, and prevents the leakage of oil into the engine chamber
- Weight: .06 lb
|
- Used on 2003-current E-Z-GO Gas, 4-Cycle TXT, MPT 800/1200 (Multi-Purpose Truck), ST 400, ST Sport II, ST Sport 2 + 2, Clays Car and Cushman 280 Vehicles with a single cable shift mechanism
- Controls forward & reverse directions
- Polyethylene covered and lined conduit; Approximate measure: 66" (fully extended), Approximate weight: .82 lbs
|
|
SPINDLE ASSEMBLY DRIVERS SIDE RXV
|
|
Forward & Reverse Cable EZGO
|
|
|
|
|
- Fits gas and electric RXV, 2008+
|
Control Cable Assembly MG5 Shuttle
|
|
HUB ASSEMBLY
|
|
350CC ENGINE REBUILD GASKET KIT
|
|
|
|
|
- Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles
- Maintains alignment positioning of wheels to allow excellent performance in many driving conditions
- Hub bearings and wheel bolts are included with hub assembly
|
- Used on E-Z-GO 4-Cycle Pre-MCI Engines manufactured before November 2003
- This kit should be used on engines that have "EH35CC" indicated on the top
- Includes gaskets, o-rings and oil seals to optimize a Pre-MCI 350CC golf car or utility vehicle engine
|
|
4-Cycle Engine Tune-Up Kit With Cylinder Air Filter
|
|
Choke Cable
|
|
|
|
|
- Used on E-Z-GO 1994-current E-Z-GO Vehicles with the 295cc and 350cc 4-Cycle Engines that require the cylinder shaped air filter, including: 2, 4, & 5-Passenger Personnel Carriers, Oasis, Shuttle Series, Grand Oasis, Refresher 1200 Beverage Cars, 800, 875 & 1200 Industrial Cars, the Clays Cars, the 800 and 1200 Workhorse Vehicles, 800 & 1200 MPT (Multi-Purpose Trucks),800 & 1200 Haulers, ST 350, ST Sport & ST Sport 2+2 Utility Vehicles, Jacobsen 1110 Haulers, and the 280 & 2200 Cushman Commanders with the newer MCI 350cc Engines
- This tune-up kit is an excellent maintenance tool for keeping your car in optimum condition
- Kit includes: 1 cylinder-shaped air filter, 1 oil filter (Fuji Engine), 1 fuel filter, 2 spark plugs, 2 spark plug wires, and 1 O-ring
|
Used on 2001-current E-Z-GO ST 480 & Cushman 4800 Models; It can also be used on E-Z-GO 2006-current Woods Boundary MAV 480 Models Assists in helping to start vehicle engine during cold start-ups Measures approximately: 39" L
|
|
DIPSTICK - OIL LEVEL GAUGE
|
|
PISTON ASSEMBLY, .50MM OVERSIZED (4-CYCLE ENGINES)
|
|
|
|
|
- Used on 2008-current Gas RXV, TXT, Cushman 280, Cushman 2200, MPT 800/1200 (Multi-Purpose Truck), Refresher 1200, ST 400, ST Sport and Vehicles with a Kawasaki FJ400D engine
- Measures oil level
- Low suspension gauge
|
|
|
Fuel Pump EZGO RXV/TXT
|
|
4 CYC STANDARD PISTON
|
|
|
|
|
Fuel Pump RXV/TXT
|
Used in 4-cycle applications, 1992-current
|
|
BRAKE CABLE (DRIVER'S SIDE)
|
|
295CC ENGINE REBUILD GASKET KIT
|
|
|
|
|
- Used on 2008-current E-Z-GO Gas RXV Vehicles
- Ensures the safe operation of the vehicle's parking/emergency braking ability
- Coated in Teflon® for longer wear and durability; Always check condition of brake cables to determine whether cables should be replaced
|
- Used on E-Z-GO 4-Cycle Pre-MCI Engines manufactured before November 2003
- This kit should be used on engines that have "EH29CC" indicated on the top
- Includes gaskets, o-rings and oil seals to optimize a Pre-MCI 295CC golf car or utility vehicle engine
|
|
BRAKE CABLE (PASSENGER'S SIDE)
|
|
FUEL TANK RXV
|
|
|
|
|
- Used on 2008-May 6, 2009 E-Z-GO Gas & Electric RXV Vehicles
- Ensures the safe operation of the vehicle's parking/emergency braking ability
- Measures: 65", Weight: 1.28 lbs
|
Fuel Tank RXV 2008 +
|
|
Forward & Reverse PUSH & PULL CABLE - 72.5"
|
|
EZGO TXT 1994.5 & up - Rear Heavy Duty Four Leaf Spring Set
|
|
|
|
|
- Used on 2001-current E-Z-GO Gas ST 350, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport II, ST Sport 2+2, Workhorse-MPT (Multi-Purpose Truck) 1200, Refresher, and Refresher 1200 Vehicles
- Enables the control of the forward & reverse directions within the vehicle's direction selector
- Measures approximately: 72.5"; Approximate weight: .80 lbs
|
^
|
|
Belt Drive
|
|
Drive Belt
|
|
|
|
|
Used on E-Z-GO ST-480 only, 2001-2004
|
Used on 2004-2007 E-Z-GO Gas ST 4x4 Models with Continuously Variable Transmissions Replacement drive belt for ST 4x4 Material composition: Fiber loaded Chloroprene
|
|
4 CYC PISTON -OVERSIZED .25MM
|
|
KAWASAKI OIL FILTER WRENCH
|
|
|
|
|
Used in 4-cycle engines, 1991-2003
|
- Used on 2008-current E-Z-GO Gas Vehicles with a Kawasaki powertrain
- Tool used in the removal of the oil filter when replacement is needed
- Measures: 3.6" x .16" x 1.5", Weight: .285 lb
|
|
Forward & Reverse PUSH & PULL CABLE
|
|
Brake Cable & Equalizer
|
|
|
|
|
- Used on 2009-current E-Z-GO TXT, 4/6-Passenger Shuttle, and 2/4/6-Passenger Cushman Vehicles
- Enables the operation of the vehicle's forward, neutral and reverse directions
- Measures: 43 x .75 x .75", Weight: .89 lb
|
- Used on 1992-1994 E-Z-GO 4-Cycle Marathon Models
- When replacing brake cable, please make sure to check the Driver's side Brake Cable (Left-Hand); Since cables tend to stretch over time, to allow for even wear on brake shoes both cables should be replaced at the same time; Your E-Z-GO golf car brake shoes should be checked at this time and replaced with the Passenger/Driver's side brake cables
- Measures: 27 3/4" Left-side; 42" Right-side
|
|
Brake Cable & Equalizer
|
|
Brake Linkage Assembly
|
|
|
|
|
- 1993-1994 E-Z-GO Electric Marathon, 1993 2-Cycle Gas Marathon, and 1993-1994 Gas & Electric XI300/500/804 Vehicles
- OEM replacement equalizer and brake cable assembly installed only on the E-Z-GO Vehicles referenced
- Weight: 2.20 lbs
|
Used on 1989-1994 E-Z-GO Gas & Electric Marathon and PC4/PC4X/PC4GX/PC4GXI Vehicles Ensures the safe operation of the vehicle's braking ability Measures: Driver's side, 27 1/8"; Passenger's side, 39 1/8"; Weight: 2.34 lbs
|
|
FRONT AXLE ASSEMBLY-MARATHON
|
|
FRONT SQUARE AXLE
|
|
|
|
|
- Used on 1989-1996 GX/X 440/444 Models
- Does not fit Medalist or TXT
|
- Used on 1994-2001 E-Z-GO Gas & Electric TXT, Medalist and Workhorse Vehicles
- Maintains wheel position in relation to vehicle's body
- Material composition: Steel
|
|
FRONT AXLE
|
|
Brake Cables with Equalizer EZGO
|
|
|
|
|
- Used on 2001-current E-Z-GO TXT, 2001-2004 800, 1000 & 1200 Workhorse Models, 2001-current Cushman Commander 280, 2100 & 2200 Models, and Jacobsen 1110 & 1110E Haulers
- This axle will not fit the Clays Car, Cushman Commander 4800 Truck, ST 350 & ST 480 Models
- The steering box assembly is mounted on top of the axle
|
- Used on 1996-current E-Z-GO Gas & Electric TXT, Medalist, Clays Car, ST Sport, ST Sport II, ST Sport 2+2, Woods Boundary MAV 400, Cushman 280 and 2002-current Workhorse-MPT 800 (Multi-Purpose Truck) Models
- Both Passenger and Driver's side Brake Cables are included
- Measures: 30 1/4"; Coated with Teflon, these cables provide durability, extended cable life, protection from freezing within the cable housing, rust protection, fraying and sticking
|
|
Park Brake Cable EZGO
|
|
STRUT ASSEMBLY (DRIVER'S SIDE)
|
|
|
|
|
|
Strut Assembly (Driver's Side) For RXV Gas and Electric
|
|
STRUT ASSEMBLY (PASSENGER'S SIDE)
|
|
FRONT AXLE WELDMENT
|
|
|
|
|
- Used on 2008-9/20/2010 E-Z-GO Gas & Electric RXV, and 2010-current 2Five Vehicles
- Necessary component for the assembly of the shock absorber
- For the corresponding strut assembly required for the vehicle's driver's side, please reference Item 601246
|
- Used on 2004-current E-Z-GO Gas & Electric Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, ST 400, ST Sport II, and Cushman 280 Vehicles
- The steering box assembly is mounted on top of the axle and maintains the wheel position relative to the vehicle's body
- Approximate weight: 22 lbs; Powder-coated Black
|
|
DROPPED FRONT AXLE
|
|
CARBURETOR ASSEMBLY - 11HP
|
|
|
|
|
- Used on 1994-2001 E-Z-GO Gas & Electric Clays Car, ST 350/480/Sport 2+2, and Lifted Vehicles
- Can be used as a replacement part on E-Z-GO Utility Vehicles, or as a new axle to lift 1994-2001 E-Z-GO Gas & Electric Medalist and TXT Models with the older steering style
- Weight: 8 lbs
|
- Used on 2002-Mid year 2008 E-Z-GO Gas 4/6-Passenger Shuttle, ST 350, ST Sport, ST Sport 2+2, ST Express, Clays Car, and 875 Vehicles
- Ensures the smooth operation of vehicle's engine by mixing the right amount of gasoline and air
- Weight: .83 lb
|
|
STEERING COLUMN SUB-ASSEMBLY
|
|
MECHANICAL BRAKE ASSEMBLY- 4084- ECHLIN- LH
|
|
|
|
|
- Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles, and Electric 2Five Vehicles
- Completes the steering column assembly
- Measures: 37.75 x 5 x 3.5", Weight: 7.11 lbs
|
- Used on 1996-current TXT & Medalist Models, in addition to E-Z-GO Golf Cars and Utility Vehicles with mechanical brakes
- For installation on the Driver's side (Left-hand) of vehicle
- 4 lug hub assembly for vehicles with mechanical brakes; Please reference Part# 612189 for ordering the brake assembly for the Right-side (Passenger's side) of your vehicle
|
|
EPA EH35C CARBURETOR ASSEMBLY
|
|
SPINDLE ASSEMBLY WITH HUB (PASSENGER'S Side)
|
|
|
|
|
- Used on E-Z-GO 350cc 4-Cycle Engines for 1994-2002 Models and Gas engine Utility Vehicles, including: the 1200, ST-350, ST Sport, ST Sport 2+2 Workhorse Utility Vehicles, the Clays Car, 4 & 6 Passenger Shuttle Carriers, the 950 Shuttle Series, All 5 Passenger Cars, the 1200 Refresher and Oasis Beverage Cars, the 875 & 1200 Industrial Cars, the 2200 Cushman Commander, and the 1100 Jacobsen Hauler Vehicles with the pre-MCI 350cc 4-cycle engines
- Used for regulating the flow of air and gasoline into the engine cylinders
- This carburetor will only fit the Pre-MCI 350cc 4-Cycle engine of vehicles manufactured from 1994-2002
|
- Used on 2001-current E-Z-GO golf, turf, commercial, and industrial vehicles, including TXT and MPT (Multi-Purpose Truck) 800 Models
- Steering component that attaches the vehicle’s axle to the hub
- Assembly includes: Spindle assembly (70942G04P), Grease seal (25146G1), Roller bearing/race assembly [qty: 2] (50892G1), 4-lug Wheel hub assembly with races & Lug bolt, 1/2-20x1 3/16" LG [qty: 4] (19862G1), Castellated nut, 1-14 (12093G1), Cotter pin, 5/32"x1 3/4" LG (00798G8); Weight: 6.4 lbs
|
|
Carburetor 13MM
|
|
Steering repair kit. For E-Z-GO G&E 1994-00
|
|
|
|
|
•Used with 2003-Current 350cc 4 Cycle Engines
|
Steering repair kit. For E-Z-GO G&E 1994-00
|
|