•  Used on 1994-Current E-Z-GO Gas & Electric Vehicles during various parts & accessories installations
•  Used primarily in front/rear vehicle body assemblies and accessory installations
•  Size: .25x.887", Material: Plastic

• Used on 2008-current E-Z-GO Gas RXV Vehicles, and TXT, ST 400, Woods Boundary MAV 400, MPT 800/1200 (Multi-Purpose Truck), Refresher,  Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles with a Kawasaki Engine
• Measures: 2.5 x 1.5 x .1", Weight: 0.005 lbs

• Used on 2008-current E-Z-GO Gas TXT, RXV, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport II, ST Sport 2+2, Clays Car, MPT  800/1200 (Multi-Purpose Truck), Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander  2200 Vehicles
• Provides a seal between the exhaust and engine head to prevent leaks that could create serious engine problems
• Measures: 2.5 x 2 x .1", Weight: 0.005 lbs

• Used on 1989-2004 E-Z-GO Gas & Electric Marathon (Gas-2/4 Cycle), 775, 804, 875, 881, Shuttle 950, PC4/PC4X/PC4GX/PC4GXI, and  XI300/500/804  Vehicles
• Separates and retains lubricants while also keeping out dirt and contaminants
• Weight: .004 lb; Outer Diameter: 1.13", Bore Diameter: 1.13", Diameter: .875"; Case Material: Cold Rolled Steel

• Used on E-Z-GO 1996-current Gas & Electric TXT, Medalist and 2008-current RXV Vehicles equipped with a rear bag holder
• Secures the Bag Restrainer Strap (Part# 71853G01) to the bag holder bracket
• Color: Black

•  Used on 1991-2008 E-Z-GO Gas TXT, Medalist, Marathon (4-cycle), PC4X/PC4GX/PC4GXI, XI300/XI500/XI804, ST 350, ST Sport, ST Sport II, ST      Sport 2+2, ST Express, Clays Car, 4/6-Passenger Shuttle, Shuttle 950, 804, 875, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, and   Vehicles with a 9 or 11 HP Engine or 1992-current 295cc or 350cc Fuji-Robin Engine
•  Creates a tight seal between the oil filter and engine
•  This item is not to be used on RXV Vehicles

• Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles
• Skid-resistant cover that fits over accelerator pedal
• Material: Rubber; Dimensions: 5 x 2.6 x 3.19"

•  Used on 2008-current E-Z-GO Electric RXV and 2010-current 2Five Vehicles
•  Replacement bushing required in leaf spring installations
•  Measures: 1.65" x 1.42" x 1.08"; Material: Internally lubricated Thermoplastic polyurethane, Color: Black

• Used on 1994-current E-Z-GO Gas & Electric TXT, 4/6-Passenger Shuttle, Medalist, ST 350, ST 400, Woods Boundary MAV 400, ST 480, Woods  Boundary MAV 480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher,  Refresher 1200, 875, 881, Shuttle 950, Cushman 2/4/6-Passenger Bellhop, Cushman 280, Cushman Titan (Electric), Cushman Commander 2200 and  2Five Electric Vehicles
• Controls pedal rebound to enable the operation of the accelerator pedal
• Measures: 4.25 x 1 x 1", Weight: .11 lb

• Used on 1992-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle, Medalist, ST 350, ST 480, Woods Boundary MAV 480, ST Sport, ST Sport II, ST Sport  2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, 875 Vehicles, and 1992-current Transaxles
• Separates and retains lubricants while also keeping out dirt and contaminants
• Size: 25 x 45 x 7"

• Used on 2001-current E-Z-GO Gas & Electric TXT, 4/6-Passenger Shuttle, Gas: ST 400, Woods Boundary MAV 400, ST 480, Woods Boundary MAV  480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher, Refresher 1200,  Cushman 2/4/6-Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles
• Keeps debris from the pinion and from entering the steering box
• Approximate weight: .05 lbs

• Used on 1991-current Gas & Electric TXT, 4/6-Passenger Shuttle, 640, 775, 875, 881, Shuttle 950, ST Express,  Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher, Refresher 1200, Cushman 2/4/6 Passenger Bellhop,  Cushman 280, Cushman Commander 2200, and Cushman Stock Chaser Vehicles
• Prevents leakage and the access of fluids and dirt to minimize damage and failure of the bearing and related  components
• Weight: .04 lb

• Used on 1992 thru mid-year 2008 E-Z-GO Gas Vehicles with a 4-Cycle, 295cc or 350cc Fuji-Robin Engine
• Located where the oil filter and oil pump connect, this ring prevents the leakage of oil
• Prior to replacement, please make sure to order the correct O-Ring for your vehicle

• Used on 2008-current E-Z-GO Gas RXV & 2004-2007 ST 4x4 Models
• Serves as a pathway for electrical energy from the ignition coil, and creates a spark that is used to ignite the air and fuel mixture within the  combustion chamber to keep your vehicle running smoothly
• Also used on Kawasaki applications

• Used on 1992-mid year 2008 E-Z-GO Gas & Electric Marathon, TXT, Medalist, 4/6-Passenger Shuttle, ST 350, ST 480, Woods Boundary MAV 480, ST  Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, 804, 875,  Shuttle 950, PC4/PC4X/PC4GX/PC4GXI, XI300/500/804, Cushman 2/4/6-Passenger Bellhop, Cushman 280 and Cushman Commander 2200 Vehicles
• Kit allows for the installation of a new or replacement accelerator pedal
• Measures: 8.9 x 3.5 x .75", Weight: .41 lb

• Used on 1992-current E-Z-GO Gas TXT, RXV, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport II, ST Sport 2+2, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles, and 1992-current 4-Cycle Transaxles
• Separates and retains lubricants while also keeping out dirt and contaminants
• Dimensions: 28 x 47 x 8"
  

• Used on 2008-current Gas Vehicles with a Kawasaki Engine, including RXV Models
• Provides ventilation for the engine in allowing the passage of air pressure and fumes from the crankcase
• Weight: .045 lb, Measures: 5.63" x .5" x 5.63"

• Fits Electric E-Z-GO Golf Cars 1988-Current

• Used on 2008-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle, RXV, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport 2+2, Clays Car,  MPT 800/1200 (Multi-Purpose Truck), Refresher, Refresher 1200, 2/4/6-Passenger Cushman Bellhop, Cushman 280 and Cushman  Commander 2200 Vehicles
•  Shuts down the fuel system should the vehicle roll-over or become upside down
• Measures: 1.5 x 1.5 x .75", Weight: .04 lb

• Used on 1994-current E-Z-GO Gas 4/6-Passenger Shuttle, ST Express, MPT 800 (Multi-Purpose Truck), and Workhorse 1200 Models
• Serves as a cover for the microswitch area of the vehicle's floorboard
• Material compostion: Sheet metal

• Used on 2004-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle, RXV, MPT 800 (Multi-Purpose Truck), Refresher, Refresher 1200, ST 400,  Woods Boundary MAV 400, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Cushman 2/4/6-Passenger Bellhop, Cushman 280,  and Cushman Commander 2200 Vehicles
•  Allows the flow of fuel through vehicle's fuel system
• Measures approximately: 10"; Weight: .02 lbs

• Used on 1994-2008 E-Z-GO TXT, Medalist, 875, 4/6-Passenger ST Express, Shuttle 950, ST 350, Workhorse 800/1200 and Refresher Models
• Responsible for recycling gas and exhaust fumes from the engine back to the air filter
• Positive Crank Ventilation Intake Hose

• Used on 2008-current E-Z-GO RXV, ST Sport 2+2, 4/6-Passenger ST Shuttle, Clays Car and MPT 800 (Multi-Purpose Truck) Vehicles, and  other manufacturer's vehicles with a 13HP Kawasaki Engine
• Returns the engine valves to their original positions
• Measures: 2.4 x 2 x 2", Weight: .21 lb

• Used on all Fuji 4-cycle engines from 1991-current
• Not for use in Kawasaki applications

• Used on E-Z-GO Gas ST 4X4 Models
• Removes contaminants and impurities from engine oil to keep your vehicle in excellent condition and prolong engine life
• For E-Z-GO ST 4x4 vehicles, it is recommended that oil changes are done twice a year or every 125 hours of vehicle  operation, and at the beginning of Spring to remove moisture accumulated from the Winter months

• Used on 1991-1996 E-Z-GO Gas Marathon, PC4X/PC4GX/PC4GXI, XI300/XI500/XI804, and 804 Vehicles
• Responsible for aiding the engine in vehicle acceleration
• Measures approximately: 33-11/16"; Material: Polyethylene covered cable with polyethylene lined conduit

• Used on 1996-2005 E-Z-GO Gas Workhorse 1200, Refresher 1200, ST 350 and ST Sport Vehicles
• Responsible for aiding the engine in vehicle acceleration
• Material: Polyethylene covered cable with polyethylene lined conduit; Measures: 40.25"

• Used on 1994-current E-Z-GO Gas TXT, 4/6-Passenger Shuttle, Medalist, ST 350, ST 400, Woods Boundary MAV 400, ST 480, Woods Boundary MAV  480, ST Sport, ST Sport II, ST Sport 2+2, ST Express, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, Refresher 1200, 875,  Cushman 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles
• Enables the safe, effective operation of the vehicle's ability to accelerate
• Measures: 7.25 x .25 x .25", Weight: .145 lb, Material: 304 Stainless Steel

Choke Cable RXV

• Used on 1991-2008 E-Z-GO Gas Marathon (4-Cycle), TXT, Medalist, 4/6-Passenger Shuttle, ST 350, ST Sport, ST Express, Workhorse 800/1200,  Refresher, 804, 875, PC4/PC4X/PC4GX/PC4GXI, and XI300/XI500/XI804 Vehicles
• This link rod should only be used on E-Z-GO Vehicles with a 4-Cycle Gas Engine
• Approximate weight: .32 oz

• Used on 1992-current E-Z-GO 4-Cycle Gas Vehicles with the 295cc and 350cc Fuji-Robin Engine
• Allows the flow of air and fuel into the engine's cylinders
• Replacement valve for vehicle

•Used on E-Z-GO 1997-current Gas & 1996-current Electric 2 and 4-Passenger Medalist, TXT and RXV (Gas only) Golf Cars, the 4 and 6 seater Shuttle Series Personnel Carriers, the Refresher 1200 Beverage Cars, the 800 and 1000 Industrial Cars, the 800 and 1200 Hauler Cars, the Clays Car, the 800, 1000, & 1200 Workhorse Trucks, the ST 350 (1996-current Gas & Electric), ST Sport, and ST Sport 2+2 Utility Vehicles, and the 800, 1000 & 1200 MPT (Multi-Purpose Truck); Also compatible with Yamaha 1994-current Models •This brake shoe is used to replace any existing brake shoe for safety and maintenance purposes while contributing to the optimum performance of your vehicle's braking system •One SET (2 brake shoes) of brake shoes is needed per wheel; This is a Non-asbestos brake shoe with measurements of: approximately 5-5/16"L x 1-3/16"W

Accelerator Cable RXV

• Used on 1984-current E-Z-GO Gas & Electric Vehicles
• Enhances suspension performance to provide a more stable, comfortable ride and handling
• Kit includes: 16 Shock Bushings, 16 Shock Washers, 8 3/8" Hex nuts

• Used on 1992-1994 E-Z-GO Gas Marathon (4-Cycle), XI300/XI500/XI804, PC4/PC4X/PC4GXI, and 804 Vehicles
• Allows the flow of air and fuel into the engine's cylinders
• Should your vehicle have a Pre-MCI engine and requires a replacement for Part# 26619G01, Valve Retainer, you should replace all of the following  valves and related components with: Valve Spring Retainer, Part# 72509G01 (4 each); Collet, Part# 72510G01 (8 each); Valve Spring, Part#  472511G01 (4 each); Intake Valve, Part# 72507G01 (2 each), Exhaust Valve, Part# 72508G01 (2 each)

• Used on 1992-2008 E-Z-GO Gas Vehicles, including: Marathon, TXT, Medalist, 804, 875, PC4GX/PC4GXI, GXI804, 4/6-Passenger Shuttle, Refresher,  ST 350, ST Sport, ST Sport II, ST Sport 2+2, Clays Car, Workhorse-MPT (Multi-Purpose Truck) 800/1200, and 1992-current 4-Cycle Vehicles with the  Pre-MCI/MCI Fuji-Robin Engine
• Seals oil valve cover
• Cannot be used on vehicles with a Kawasaki Engine

• Used on 2008-current E-Z-GO Gas & Electric RXV and 2010-current Electric 2Five Vehicles
• Connects the front wheels in the vehicle's front suspension to direct the wheels via the steering system
• Measures: 4" x 4" x 2"

• Used on 2001-current E-Z-GO Gas & Electric TXT, Medalist, MPT (Multi-Purpose Truck) & Workhorse 800/1000/1200, Clays Car, Refresher 1200, ST Sport, ST Sport II & 4-6 Passenger ST Express, ST Sport 2+2, Shuttle Series, 2/4/6 Passenger Bellhop, and Cushman 280; Also fits 1989-1994 Gas & Electric Marathon •Part of your vehicle's front suspension that, along with the spring, controls the up-and-down motion of your wheels; Shocks should be replaced if your vehicle experiences prolonged bouncing •Bushings are not included with shock, please reference Part# 10194G1 for ordering shock bushings; This shock replaces Part# 70928G01

• Used on E-Z-GO 2Five and RXV Vehicles
• Bolt: M12-1.25 X 150
• Hardware fits with Kingpin Tube (Item# 614034)

EXHAUST VALVE FOR 295/350CC ENGINES WITH COLLET STYLE KEEPERS

• Used on Gas & Electric E-Z-GO Vehicles with a 1992-current 295cc or 350cc Engine

• Used on GXT/GXI-300/500/804 1991-1992

• Used on 1991-1996 E-Z-GO Gas 804 and Marathon 4-Cycle Engine Models
• Control cable that operates within vehicle's forward and reverse direction selector
• Approximate weight: .44 lbs

• Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles, and 2Five Electric Vehicles

• Used on 2008-current E-Z-GO Gas & Electric RXV, and Electric 2Five Vehicles
• Links the steering wheel to the steering unit
• This yoke should only be used on RXV and 2Five Vehicles

• Used on 1998-2004 E-Z-GO Gas TXT, Medalist, 4/6-Passenger Shuttle Models
• Encloses and protects air filter box
• Material composition: Plastic

• Used on 1991-1996 E-Z-GO Gas 804 and Marathon 4-Cycle Engine Models
• Control cable that operates within vehicle's forward and reverse direction selector
• Approximate weight: .44 lbs

Choke cable. For E-Z-GO gas 2004-up ST4x4

• Used on 1998-2004 E-Z-GO Gas 875 & Shuttle 950 Vehicles
• Enables the vehicle to accelerate when the gas pedal is pressed
• Measures: 66"; Polyethylene covered, lined cable

PISTON FOR 295CC ENGINE

PISTON RING SET (OVER SIZE, 0.500MM)

• Used on 2008-current E-Z-GO Gas RXV, Refresher and Refresher 1200 Vehicles
• Prevents leakage of fuel and the entry of contaminants that would otherwise prove harmful to the fuel system
• This fuel cap should only be used on RXV and Refresher Vehicles to ensure a secure fit

• Used on 2008-current E-Z-GO Gas Vehicles with a Kawasaki 13HP Engine
• Aids in maintaining optimum vehicle performance
• Included in the kit are: Air Filter, Oil Filter, Fuel Filter, and spark plug for a Kawasaki Engine

• Used on 2010-current E-Z-GO Electric 2Five Vehicles
• Mounts between the vehicle's frame and the axle housing to carry and balance the load of the vehicle
• Measures: 32" x 2" x 4", Weight: 6 lbs

•  Fits E-Z-GO Electric Workhorse 800 1999 - 2000, Electric Shuttle 4/6/ST Express 2005-2009, Electric MPT 800 & 1000 2004 - 2007 and Gas MPT 1200 2006-2008

• Used on 1992-current E-Z-GO Gas Vehicles with a 295cc (Pre-MCI/MCI) Fuji-Robin Engine
• Prevents combustion pressure from leaking into the crankcase, and prevents the leakage of oil into the engine chamber
• Measures: 3.45" x 3.45" x 0.5", Weight: .005 lb

• Used on all 1992-current 4-Cycle 295cc Fuji-Robin engines, including MCI and Pre-MCI
• Regulates engine oil consumption, seals the combustion chamber, and supports the transfer of heat from the piston to the cylinder wall
• Set includes three rings, two compression and one wiper ring; Two sets are needed per Engine, these are the standard size piston rings

Fits Gas EzGo TXT Models, 2010+

• Fits 350cc engines, 1994 - current

• Fits 350cc engines, 1994 - current

• Used on 1994-current E-Z-GO Gas Vehicles with a 350cc (Pre-MCI/MCI) Fuji-Robin Engine
• Prevents combustion pressure from leaking into the crankcase, and prevents the leakage of oil into the engine chamber
• Measures: 3.45" x 3.45" x 0.5", Weight: .005 lb

PISTON RING SET EH35C

• Used on 2008-current E-Z-GO Gas RXV, TXT, ST 400, ST Sport, ST Sport 2+2, Woods Boundary MAV 400, ST Express, Clays Car, 4/6- Passenger Shuttle, MPT 800/1200 (Multi-Purpose Truck), Refresher, Refresher 1200, Cushman 280, Cushman 2200, and Cushman 2/4/6- Passenger Bellhop
• Responsible for powering many of the vehicle's accessories during the operation of the engine's crankshaft
• Outer circumference: Approximately 36"

• Used on E-Z-GO ST 480 Models Only
• Connects the throttle body of the carburetor to the accelerator pedal
• Replacement of the vehicle's accelerator cable may be needed if you experience slow engine response when pressing the gas pedal

• Fits all 4-cycle engines for 295cc and 350cc

• Used on 2002-2009 E-Z-GO Gas TXT, Workhorse-MPT (Multi-Purpose Truck) 800/1200, ST 350 and ST Sport, ST Sport II, ST Sport 2+2, and Clays Car Vehicles
• Aids engine in vehicle acceleration
• Measures: 52.06" L

• Used on all 1991-current E-Z-GO 4-Cycle golf cars and utility vehicles, and is compatible with 1984-1996 Club Car vehicles and 2004-current DS  Series, Precedent Gas Models, 1972-1995 Columbia 2-Cycle Gas Vehicles, and Yamaha G1/G2/G8/G9/G11/G14/G16/G22 Gas Models
• This is a replacement brush for all vehicles with the Hitachi starter/generator
• 4 starter brushes are included

• Used on 2001-current E-Z-GO Gas TXT, Medalist, Clays Car, Workhorse-MPT 800 (Multi-Purpose Truck), ST Sport 2+2, ST Sport, ST Sport II &  Cushman 280
• Connects from the accelerator pedal to the governor
• Measures approximately: 42.22” (Before bend)

• Used on E-Z-GO 1994-current E-Z-GO Vehicles with 295cc or 350cc 4-Cycle Engine that require the rectangular shaped air filter, including: 2, 4,  & 5-Passenger TXT, Medalist, Tuff 1 or 804 Turf Trucks, Personnel Carriers, Oasis, Shuttle Series, Grand Oasis, Refresher 1200 Beverage Cars,  800 & 1200 Industrial Cars, the Clays Cars, the 800 and 1200 Workhorse Vehicles, 800 & 1200 Haulers, ST 350, ST Sport & ST Sport 2+2 Utility  Vehicles, Jacobsen 1110 Haulers, and the 280 & 2200 Cushman Commanders with the newer style MCI 295cc Engine
• This tune-up kit is an excellent maintenance tool for keeping your vehicle in optimum condition
• Kit includes: 1 rectangular-shaped air filter, 1 oil filter (Fuji Engine), 1 fuel filter, 2 spark plugs, 2 spark plug wires, and 1 O-ring

• Used on 1992-current E-Z-GO 4-Cycle Gas Vehicles, including 4 Caddy, TXT 2+2 & Clays Car, 804, Tuff 1, the WorkHorse & MPT (Multi-Purpose  Truck) Models 800 (4-Cycle Gas only) & the 1200, can also be used on 48V Electric MPT 1000 and 4/6-Passenger Shuttle Vehicles; Also used on  Cushman Commander Gas 280 & 2200 Model trucks, the Jacobson 1110 Gas truck and the Brouwer LX1200 truck; This item replaces part number  21807G1P
• This part is NOT suitable for the E-Z-GO 800 and 900 Series heavy-duty, gas powered carriers or 1992-current ST 350, ST 480 and ST 4x4 trucks  with hydraulic brakes
• Has a 1 5/16" center hole with an internal 30-tooth "star" spline to interface with the axle. It is held in place by a castellated nut (3/4" x 16tpi) and a  thick (.118") flat washer. All Electric models and the earlier 2-cycle gas hub/drums have a smaller hole and are not interchangeable with this  hub/drum

• Used on 2008-current Vehicles with a Kawasaki Engine
• Prevents combustion pressure from leaking into the crankcase, and prevents the leakage of oil into the engine chamber
• Weight: .06 lb

• Used on 2003-current E-Z-GO Gas, 4-Cycle TXT, MPT 800/1200 (Multi-Purpose Truck), ST 400, ST Sport II, ST Sport 2 + 2, Clays Car and Cushman  280 Vehicles with a single cable shift mechanism
• Controls forward & reverse directions
• Polyethylene covered and lined conduit; Approximate measure: 66" (fully extended), Approximate weight: .82 lbs

• Fits gas and electric RXV, 2008+

Control Cable Assembly MG5 Shuttle

• Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles
• Maintains alignment positioning of wheels to allow excellent performance in many driving conditions
• Hub bearings and wheel bolts are included with hub assembly

• Used on E-Z-GO 4-Cycle Pre-MCI Engines manufactured before November 2003
• This kit should be used on engines that have "EH35CC" indicated on the top
• Includes gaskets, o-rings and oil seals to optimize a Pre-MCI 350CC golf car or utility vehicle engine

•  Used on E-Z-GO 1994-current E-Z-GO Vehicles with the 295cc and 350cc 4-Cycle Engines that require the cylinder shaped air filter, including: 2,  4, & 5-Passenger Personnel Carriers, Oasis, Shuttle Series, Grand Oasis, Refresher 1200 Beverage Cars, 800, 875 & 1200 Industrial Cars, the  Clays Cars, the 800 and 1200 Workhorse Vehicles, 800 & 1200 MPT (Multi-Purpose Trucks),800 & 1200 Haulers, ST 350, ST Sport & ST Sport  2+2 Utility Vehicles, Jacobsen 1110 Haulers, and the 280 & 2200 Cushman Commanders with the newer MCI 350cc Engines
•  This tune-up kit is an excellent maintenance tool for keeping your car in optimum condition
• Kit includes: 1 cylinder-shaped air filter, 1 oil filter (Fuji Engine), 1 fuel filter, 2 spark plugs, 2 spark plug wires, and 1 O-ring

• Used on 2008-current Gas RXV, TXT, Cushman 280, Cushman 2200, MPT 800/1200 (Multi-Purpose Truck), Refresher 1200, ST 400, ST Sport  and Vehicles with a Kawasaki FJ400D engine
• Measures oil level
• Low suspension gauge

• Used on 2008-current E-Z-GO Gas RXV Vehicles
• Ensures the safe operation of the vehicle's parking/emergency braking ability
• Coated in Teflon® for longer wear and durability; Always check condition of brake cables to determine whether cables should be replaced

• Used on E-Z-GO 4-Cycle Pre-MCI Engines manufactured before November 2003
• This kit should be used on engines that have "EH29CC" indicated on the top
• Includes gaskets, o-rings and oil seals to optimize a Pre-MCI 295CC golf car or utility vehicle engine

•  Used on 2008-May 6, 2009 E-Z-GO Gas & Electric RXV Vehicles
•  Ensures the safe operation of the vehicle's parking/emergency braking ability
•  Measures: 65", Weight: 1.28 lbs

• Used on 2001-current E-Z-GO Gas ST 350, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport II, ST Sport 2+2, Workhorse-MPT (Multi-Purpose  Truck) 1200, Refresher, and Refresher 1200 Vehicles
• Enables the control of the forward & reverse directions within the vehicle's direction selector
• Measures approximately: 72.5"; Approximate weight: .80 lbs

^

Used on E-Z-GO ST-480 only, 2001-2004

• Used on 2008-current E-Z-GO Gas Vehicles with a Kawasaki powertrain
• Tool used in the removal of the oil filter when replacement is needed
• Measures: 3.6" x .16" x 1.5", Weight: .285 lb

• Used on 2009-current E-Z-GO TXT, 4/6-Passenger Shuttle, and 2/4/6-Passenger Cushman Vehicles
• Enables the operation of the vehicle's forward, neutral and reverse directions
• Measures: 43 x .75 x .75", Weight: .89 lb

• Used on 1992-1994 E-Z-GO 4-Cycle Marathon Models
• When replacing brake cable, please make sure to check the Driver's side Brake Cable (Left-Hand); Since cables tend to stretch over time, to allow for even wear on brake shoes both cables should be replaced at the same time; Your E-Z-GO golf car brake shoes should be checked at this time and replaced with the Passenger/Driver's side brake cables
• Measures: 27 3/4" Left-side; 42" Right-side
  

• 1993-1994 E-Z-GO Electric Marathon, 1993 2-Cycle Gas Marathon, and 1993-1994 Gas & Electric XI300/500/804 Vehicles
• OEM replacement equalizer and brake cable assembly installed only on the E-Z-GO Vehicles referenced
• Weight: 2.20 lbs

• Used on 1989-1996 GX/X 440/444 Models
• Does not fit Medalist or TXT

•  Used on 1994-2001 E-Z-GO Gas & Electric TXT, Medalist and Workhorse Vehicles
•  Maintains wheel position in relation to vehicle's body
•  Material composition: Steel

• Used on 2001-current E-Z-GO TXT, 2001-2004 800, 1000 & 1200 Workhorse Models, 2001-current Cushman Commander 280, 2100 & 2200 Models,  and Jacobsen 1110 & 1110E Haulers
• This axle will not fit the Clays Car, Cushman Commander 4800 Truck, ST 350 & ST 480 Models
• The steering box assembly is mounted on top of the axle

• Used on 1996-current E-Z-GO Gas & Electric TXT, Medalist, Clays Car, ST Sport, ST Sport II, ST Sport 2+2, Woods Boundary MAV 400, Cushman 280 and 2002-current Workhorse-MPT 800 (Multi-Purpose Truck) Models
• Both Passenger and Driver's side Brake Cables are included
• Measures: 30 1/4"; Coated with Teflon, these cables provide durability, extended cable life, protection from freezing within the cable housing, rust protection, fraying and sticking

• Used on 2008-9/20/2010 E-Z-GO Gas & Electric RXV, and 2010-current 2Five Vehicles
• Necessary component for the assembly of the shock absorber
• For the corresponding strut assembly required for the vehicle's driver's side, please reference Item 601246

• Used on 2004-current E-Z-GO Gas & Electric Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, ST 400, ST Sport  II, and Cushman 280 Vehicles
• The steering box assembly is mounted on top of the axle and maintains the wheel position relative to the vehicle's body
• Approximate weight: 22 lbs; Powder-coated Black

• Used on 1994-2001 E-Z-GO Gas & Electric Clays Car, ST 350/480/Sport 2+2, and Lifted Vehicles
• Can be used as a replacement part on E-Z-GO Utility Vehicles, or as a new axle to lift 1994-2001 E-Z-GO Gas & Electric  Medalist and TXT Models with the older steering style
• Weight: 8 lbs

• Used on 2002-Mid year 2008 E-Z-GO Gas 4/6-Passenger Shuttle, ST 350, ST Sport, ST Sport 2+2, ST Express, Clays Car, and 875 Vehicles
• Ensures the smooth operation of vehicle's engine by mixing the right amount of gasoline and air
• Weight: .83 lb

• Used on 2008-current E-Z-GO Gas & Electric RXV Vehicles, and Electric 2Five Vehicles
• Completes the steering column assembly
• Measures: 37.75 x 5 x 3.5", Weight: 7.11 lbs

• Used on 1996-current TXT & Medalist Models, in addition to E-Z-GO Golf Cars and Utility Vehicles with mechanical brakes
• For installation on the Driver's side (Left-hand) of vehicle
• 4 lug hub assembly for vehicles with mechanical brakes; Please reference Part# 612189 for ordering the brake assembly for the Right-side  (Passenger's side) of your vehicle

• Used on E-Z-GO 350cc 4-Cycle Engines for 1994-2002 Models and Gas engine Utility Vehicles, including: the 1200, ST-350, ST Sport, ST Sport 2+2  Workhorse Utility Vehicles, the Clays Car, 4 & 6 Passenger Shuttle Carriers, the 950 Shuttle Series, All 5 Passenger Cars, the 1200 Refresher and  Oasis Beverage Cars, the 875 & 1200 Industrial Cars, the 2200 Cushman Commander, and the 1100 Jacobsen Hauler Vehicles with the pre-MCI  350cc 4-cycle engines
• Used for regulating the flow of air and gasoline into the engine cylinders
• This carburetor will only fit the Pre-MCI 350cc 4-Cycle engine of vehicles manufactured from 1994-2002

• Used on 2001-current E-Z-GO golf, turf, commercial, and industrial vehicles, including TXT and MPT (Multi-Purpose Truck) 800 Models
• Steering component that attaches the vehicle’s axle to the hub
• Assembly includes: Spindle assembly (70942G04P), Grease seal (25146G1), Roller bearing/race assembly [qty: 2] (50892G1), 4-lug Wheel hub  assembly with races & Lug bolt, 1/2-20x1 3/16" LG [qty: 4] (19862G1), Castellated nut, 1-14 (12093G1), Cotter pin, 5/32"x1 3/4" LG (00798G8);  Weight: 6.4 lbs

• Used on January 9, 2001-current E-Z-GO Gas & Electric Medalist and TXT Models; Will also fit 2009 E-Z-GO Gas & Electric Clays Car, ST 4 & 6  Passenger Shuttles, ST Sport 2+2, and 4 & 6 Passenger Vehicles with mechanical brakes
• Provides up to a 4" Lift on golf car frames
• Weighs: 8 lbs

• Spindle Assembly for the Passenger side of current E-Z-GO ST 350 Vehicles

• Used on 1992-mid year 2008 E-Z-GO Gas Vehicles with a 4-Cycle Fuji-Robin Engine
• OEM replacement part of the pulley in the vehicle's driver pulley
• Weight: .20 lb

• Used on 2001-current Gas & Electric TXT, ST 480 (Gas), ST Sport, ST Sport II, ST Express, Clays Car, 4/6-Passenger Shuttle, 2/4/6-Passenger  Bellhop, Workhorse-MPT (Multi-Purpose Truck) 800/1000/1200, Refresher, Refresher 1200, Cushman 280 and Cushman 2200
• Connects steering shaft to steering box
• Approximate weight: 2.28 lbs

• Spindle Assembly for the Driver side of current E-Z-GO ST 350 Vehicles

• Used on 1994-2008 E-Z-GO Gas TXT, Medalist, 4/6-Passenger Shuttle, 875, ST 350, ST 400, ST Sport, ST Sport II, ST Sport 2+2, Clays Car,  Workhorse-MPT (Multi-Purpose Truck) 800/1200, Refresher, and Shuttle 950 Vehicles
• Used to mount 4-Cycle, Fuji-Robin Engines
• Approximate weight: 7.8 lbs

• Used on 2002-mid year 2008 E-Z-GO Gas Vehicles with a 295cc [EH29CPG5012] or 350cc [EH35CPG5033] Fuji-Robin Engine
• Causes the cams to opens and close the engine valves to properly allow for the intake and exhaust of the mixture of air and fuel
• Measures: 8.25 x 6.25 x 2", Weight: 1.45 lbs

• Used on 2008-current E-Z-GO Gas RXV Vehicles, and vehicles with a Kawasaki Engine
• Reduces and cancels out engine noise
• Material: Aluminized Steel, Finish: Black Paint

• Used on E-Z-GO: 1991-1994 Gas 4GX, 4GXI, 1993-1994 Gas Marathon, 1993-1996 Gas 804, 1994-1996 Gas Medalist, 1996 Gas Workhorse 1200, Gas  Shuttle 950 Series, 1994-2004 Gas 875, 1995-2008 Gas 4/6 Shuttle & ST Express, 1996-current Gas TXT, 2003-2005 Gas ST 480, 2006-current  Woods Boundary MAV 480, and ST 480 Models with a Briggs & Stratton Engine
• Factory replacement Driven Clutch
• When replacing the driven clutch on your vehicle, it's recommended that the drive belt is also replaced.

• Used on 2008-current E-Z-GO Gas RXV in addition to MPT, ST and Shuttle Vehicles with a Kawasaki Engine
• Please Note: This item should only be installed on the E-Z-GO Vehicles referenced with a Kawasaki Engine

• Used on 1994-2006 E-Z-GO Gas TXT, Medalist, 875, 4/6-Passenger Shuttle, ST 350, ST Sport, ST Sport 2+2, ST Express, Shuttle 950, Workhorse  800/1200, Clays Car & Refresher Vehicles, in addition to 1994-2004 vehicles with MCI, 4-Cycle Engines; Cannot be used on vehicles with a Kawasaki  Engine
• Reduces and cancels out engine noise
• Material composition: Sheet metal and steel

•  Used on 2003-2008 E-Z-GO Gas Vehicles with a 4-Cycle Fuji-Robin Engine (295cc-MCI) including: TXT, 4/6-Passenger Shuttle, ST 350, ST Sport, ST      Sport II, ST Express, Clays Car, and MPT (Multi-Purpose Truck) 800/1200
•    Reduces exhaust system noise generated from vehicle engine, also reduces emissions
•    Approximate weight: 11.6 lbs; Material: Aluminized steel, Finish: Black paint

• Used on 1994-2000 E-Z-GO Gas & Electric 2-, 4- & 5-Passenger Medalist, TXT, 4 & 6-Passenger Shuttle Carriers, Workhorse 800, 1000, and 1200  Models with the frame-mounted steering box
• This Steering Box can also fit 1994-current E-Z-GO Clays Car, ST Sport 2+2, ST 350, ST 480 (through 2005), the 280, 2100, 2200 & 4800 Model  Cushman Commander, the Jacobsen, Brouwer & Steiner Trucks and the MPT 800 (Multi-Purpose Truck); Also fits some 2001 TXT & ST Vehicles that  have the frame mounted steering unit
• Made of cast Aluminum; Note: Be certain of the Model type when ordering, this Steering Box fits E-Z-GO Vehicles made after January 2001, unless  otherwise noted

• Used on 2004 - Current E-Z-GO Gas & Electric MPT-Workhorse 800/1000/1200, ST 400, ST Sport II, Express S6, Terrain 250/500/1000, and  Cushman 280 Vehicles
• OEM Replacement steering box assembly which enables the rotational operation of the steering wheel
• Weight: 6.47 lbs

• Used on 1991-current E-Z-GO 4-Cycle Vehicles including: E-Z-GO 2,4,5 Passenger Marathon, Medalist, TXT Models, the Workhorse 800, 1200,  Cushman Commanders and Jacobsen 1110 Hauler Golf Cars and Utility Vehicles, in addition to the 875 Cargo and Personnel Carriers, the PC Series  and the Shuttle 2+2, 4- & 6-Passenger, 952, 954, and 956 Series Personnel cars, BC Series, the Refresher 1200, the Oasis and Grand Oasis  Beverage cars, the 800 & 875 Industrial cars, the Clays Car, the Tuff 1 Turf Truck, the ST Sport, ST Sport 2+2, and ST 350 Utility Vehicles
• When replacing the Drive Clutch for your E-Z-GO 4-Cycle Vehicle, you should also check the Drive Belt-- typically, it should be replaced when the  Drive Clutch is replaced
• This is a factory made Drive Clutch for E-Z-GO Golf cars and Utility Vehicles 1991-current with a 4-Cycle 295cc or 350cc Gas Engine

• Used on 2008-current E-Z-GO Gas 4/6-Passenger Shuttle, ST 400, Woods Boundary MAV 400, ST Sport, ST Sport 2+2, Clays Car, MPT 800/1200 (Multi-Purpose Truck), Refresher, Refresher 1200, 2/4/6-Passenger Bellhop, Cushman 280, and Cushman Commander 2200 Vehicles
• Weight: 64 lbs.
• Manufacture Alternate Part Number 607154