|
50AMP DC FUSE FOR POWERWISE
|
|
SILICON RECTIFIER DIODE WITHOUT HARDWARE
|
|
|
|
|
|
- Used on 1994-2008 Powerwise 36V Total Charge III & IV, 36V Powerwise Chargers for E-Z-GO Electric TXT and Medalist Models, in addition to 875/881 and MPT 800 (Multi-Purpose Truck) Vehicles
- Used only on E-Z-GO Powerwise chargers
- Total length: 1.610", Hole diameter: .215", Hole center to center: 1.180"
|
- Used on 1989-2007 E-Z-GO Electric Marathon, TXT, Medalist, XI300/XI500/XI804, PC4, PC4X, PC4GX/PC4GXI, 640, 775, 804, 835, 875, 881, Shuttle 950, Workhorse 800/1000, and MPT 800 (Multi-Purpose Truck) Vehicles for use with 36 Volt Powerwise, Powerwise Plus, Total Charge III & IV Chargers
- Regulates and maintains the electrical power to the charger in order to provide appropriate power to the vehicle
- Replacement of a diode is necessary for the operation of the charger should the diode burn out or experience a voltage spike
|
|
|
|
FUSE 60 AMP MEGA
|
|
25 amp dual link fuse. For Club Car electric 1985-up 36-volt.
|
|
|
|
|
|
- Used on 1994-current E-Z-GO Electric TXT & Medalist Models for Powerwise Chargers
- Protects batteries from power surges and potential damage
- 60 Amps, 36 Volts
|
25 amp dual link fuse. For Club Car electric 1985-up 36-volt.
|
|
|
|
POWERWISE CHARGER PLUG - BOTTOM HALF
|
|
CAPACITOR-20MFD/330VAC-POWERWISE
|
|
|
|
|
|
- Used on the Powerwise charger with 1997-current E-Z-GO Electric TXT, Medalist, 875, 881, MPT 800 (Multi-Purpose Truck), Workhorse 800/1000, Clays Car, ST Sport and Shuttle 950 Models
- Fits bottom half of 36 Volt Powerwise Chargers
- Material composition: Reinforced Polypropylene Fiberglass
|
- Used on 1994-current E-Z-GO Electric TXT, Medalist, 835, 875 & 881 Models
- Stores electrical energy
- Used with Powerwise Chargers only
|
|
|
|
CAPACITOR-TOTAL CHARGER
|
|
AC CORD ASSEMBLY FOR PORTABLE CHARGER
|
|
|
|
|
|
- Used on 1989-2007 E-Z-GO Electric Medalist and Marathon Models, including 640, 775, 804, 835, 875, PC4, PC4X, PC4GX, PC4GXI, XI300, XI500, XI804 & Shuttle 950 Vehicles
- Stores electric energy
- Used with 36 Volt Powerwise Chargers
|
- Used on 1989-2007 E-Z-GO Electric 36 Volt Vehicles, including: Marathon, Medalist, XI300/XI500/XI804, 640, 775, 804, 835, 875, PC4/PC4X/PC4GX, PC4GXI and Shuttle 950 Models
- Power cord for Powerwise Total Charge III & Total Charge IV Battery Chargers
- Approximate weight: .59 lbs
|
|
|
|
Ammeter Lester
|
|
Amp Meter Lester
|
|
|
|
|
|
|
Ammeter 30 amp. Fits Lester model #'s 13110, 9800, 9695, 9700*, 7850, 7710* & 6430. *Models built before 12/90
|
Ammeter, (36-volt/0-30 amp). For Lester model #13165, 9611, 9032, 9028, 9027, 8946, 8714, 8650, 8714, 8600. For Club Car electric 36-volt
|
|
|
|
Module control board for EZGO Total charge models
|
|
48 VOLT DELTA-Q CHARGER RECEPTACLE
|
|
|
|
|
|
|
Module control board. For all Total charge models except Total Chrge II
|
- Used on 2008-current E-Z-GO Electric 48 Volt RXV & 2010-current 2Five Vehicles
- Receptacle input that enables the charge to vehicle's batteries
- Consists of: Interlock (blue wire, 18 AWG, 300 Volt), Split loom (Black, I.D. .350"), Battery+ (red wire, 14 AWG, 600 Volt, M8 ring terminal), Temperature sensor (gray wire, 22 AWG, stranded, 300 Volt, M8 ring terminal), and Battery- (black wire, 14 AWG, 600 Volt, M8 ring vterminal)
|
|
|
|
Capacitor 3MFD/660 Vac - Powerwise II EZGO
|
|
48 VOLT DC CORD (3 METERS)
|
|
|
|
|
|
|
Used on E-Z-GO Powerwise II & Lester On-Board Chargers for Electric Vehicles
|
- Used on 2010-current E-Z-GO 48-Volt Electric Vehicles for 48-Volt Powerwise QE Chargers
- Replacement cord required in the charger assembly to enable the charger to provide electrical power to the vehicle
- Measures: 3 meters in length
|
|
|
|
E-Z-GO powerwise 36-volt 1994-up Medalist/TXT
|
|
Control board For E-Z-GO Powerwise+ chargers. Medalist/TXT
|
|
|
|
|
|
|
Power input board . For E-Z-GO powerwise+ chargers. For E-Z-GO electric 36-volt 1994-up Medalist/TXT
|
Control board only. For E-Z-GO Powerwise+ chargers. For E-Z-GO electric 36-bolt 1994-up Medalist/TXT
|
|
|
|
CHARGING RECEPTACLE - 48 VOLT
|
|
48 VOLT ELECTRONIC SPEED CONTROLLER ASSEMBLY
|
|
|
|
|
|
- Used on 1995-current E-Z-GO Electric TXT, Medalist, 4/6-Passenger Shuttle and ST Express Models
- Allows vehicle to be charged with 48 Volt Powerwise Chargers
- Installation hardware included
- Manufacture alternate 73051G30
|
- Used on 1996-2004 E-Z-GO Electric 48 Volt 4/6-Passenger Shuttle, Shuttle 950, 875 and Cushman Titan Vehicles
- Varies the speed and direction of the vehicle through the electric motor
- Current Limit: 350 Amps, Plug Current: 230 Amps, Reverse Speed: 60% of Full Speed
|
|
|
